Examtopics

Professional Cloud Network Engineer

  • Topic 1 Question 230

    You configured a single IPSec Cloud VPN tunnel for your organization to a third-party customer. You confirmed that the VPN tunnel is established. However, the BGP session status states that the BGP is not configured. The customer has provided you with their BGP settings:

    • Local BGP address: 169.254.11.1/30 • Local ASN: 64515 • Peer BGP address: 169.254.11.2 • Peer ASN: 64517 • Base MED: 1000 • MD5 Authentication: Disabled

    You need to configure the local BGP session for this tunnel based on the settings provided by the customer. You already associated the Cloud Router with the Cloud VPN Tunnel. What settings should you use for the BGP session?

    • Peer ASN: 64517 - Advertised Route Priority (MED): 100

      Local BGP IP: 169.254.11.2 -

      Peer BGP IP: 169.254.11.1 - MD5 Authentication: Disabled

    • Peer ASN: 64515 - Advertised Route Priority (MED): 100

      Local BGP IP: 169.254.11.1 -

      Peer BGP IP: 169.254.11.2 - MD5 Authentication: Disabled

    • Peer ASN: 64515 - Advertised Route Priority (MED): 100

      Local BGP IP: 169.254.11.2 -

      Peer BGP IP: 169.254.11.1 - MD5 Authentication: Disabled

    • Peer ASN: 64515 - Advertised Route Priority (MED): 1000

      Local BGP IP: 169.254.11.2 -

      Peer BGP IP: 169.254.11.1 - MD5 Authentication: Enabled

    シャッフルモード