Topic 1 Question 161
2 つ選択You have the networking configuration shown in the diagram. A pair of redundant Dedicated Interconnect connections (int-Iga1 and int-Iga2) terminate on the same Cloud Router. The Interconnect connections terminate on two separate on-premises routers. You are advertising the same prefixes from the Border Gateway Protocol (BGP) sessions associated with the Dedicated Interconnect connections. You need to configure one connection as Active for both ingress and egress traffic. If the active Interconnect connection falls, you want the passive Interconnect connection to automatically begin routing all traffic. Which two actions should you take to meet this requirement? (Choose two.)
Configure the advertised route priority as 200 for the BGP session associated with the active interconnect connection.
Configure the advertised route priority > 10,200 on the active Interconnect connection.
Advertise a lower MED on the active Interconnect connection from the on-premises router.
Advertise a lower MED on the passive Interconnect connection from the on-premises router.
Configure the advertised route priority as 200 for the BGP session associated with the passive Interconnect connection.
ユーザの投票
コメント(10)
The base priority is 100. there is no region to region cost.
So you want to set the base priority of the passive interconnect to 200 and keep the active one default of 100. the MED will be 100 for active and 200 for passive.
A&E are the answers https://cloud.google.com/network-connectivity/docs/router/concepts/overview
👍 3desertlotus12112024/08/29- 正解だと思う選択肢: CE
will say C & E the passiv connection needs to have a higher MED number than the active
so setting the passiv to 200 means that the active needs to be sat to under 200
👍 2Don_Kjeldsen2024/09/11 - 正解だと思う選択肢: CE
The default Priority is 100, it doesn't make sense to give a priority of 200 or more than 99 to the active link. 200 should be the priority for the passive link then.
👍 2hamish882024/11/02
シャッフルモード